Extreme Blower Spreader XD

Description

Turn Your Leaf Blower Into a Blower Spreader

The Extreme Blower Spreader XD turns your leaf blower into a fast, handheld blower spreader. Strap it on, fill the hopper, and walk, and the airflow throws seed, fertilizer, and ice melt in a wide, even pattern. As a result, you don’t have to drag a heavy push spreader across uneven ground or buy and maintain an extra engine.

The XD is the extra-duty model. It features a larger 1-1/4-inch flow gate, so it moves big, heavy granules like ice melt, rock salt, corn, and beans with ease. You can also close the gate to spread fine seed, lime, and fertilizer.

What You Can Spread

This blower spreader works year-round. Use it for:

• Food plot seed, such as millet, sorghum, oats, turnips, radish, and sunflowers
• Pollinator and wildflower seed mixes
• Grass seed for lawns, pond banks, and dam slopes
• Granular fertilizer and lime
• Ice melt and rock salt for drives, walks, and lots
• Larger seeds, like corn and beans

Features and Benefits

• Large 1-1/4-inch flow gate: Handles big granules like ice melt and corn, and it moves more product at a time than the smaller XL model.
• Adjustable flow control: Set the gate to match your material for an even, consistent spread every time.
• 25-quart hopper: Holds about 7 to 9 pounds of product, so you refill less often.
• Quick strap-on mount: Two straps hold the base to your blower tube. Once set up, it goes on in seconds.
• Gas or battery blowers: Fits most blowers with a round tube from 2-3/4 to 3 inches.
• See-through tank: Check your material level at a glance, then refill before you run out mid-job.
• No extra equipment: Use the blower you already own and skip the expense of buying or renting a separate spreader.
• Made in the USA: Built in Edon, Ohio, by a company that has made spreaders since 2014.

What’s in the Box

• XD hopper with 1-1/4-inch gate valve
• Spreader base
• Two mounting straps
• Pouring funnel
• 1-1/4-inch (32 mm) hole saw for setup

How to Use Your Blower Spreader

1. Mount it. First, follow the setup guide. Then strap the base to your blower tube and snap on the hopper.
2. Set the gate. Next, open the gate wide for large granules, or close it down for fine seed.
3. Fill and walk. Finally, pour in your material with the funnel, start the blower, and walk at a steady pace.

Specifications

• Model: Extreme Blower Spreader XD
• Hopper capacity: 25 quarts (about 7 to 9 lbs)
• Flow gate: 1-1/4 inch, adjustable
• Blower fit: Round tube, 2-3/4 to 3 inches
• Power source: Gas or battery leaf blowers
• Made in: Edon, Ohio, USA

Blower Spreader FAQs

Will this blower spreader fit my leaf blower?

It fits most gas and battery blowers with a round tube from 2-3/4 to 3 inches wide. Before you order, measure across your blower tube to be sure.

How is the XD different from the XL model?

The XD has a larger flow gate. Because of this, it is the better choice for big granules like ice melt, corn, and beans. It also moves more product at once.

How much does the hopper hold?

The hopper holds 4.25 quarts. That’s about 7 to 9 pounds, depending on the material’s weight.

Can I spread ice melt and rock salt?

Yes. In fact, the large gate makes the XD a great fit for ice melt and salt on drives, walks, and parking areas.

Can I use it to seed pond banks?

Yes. It spreads grass seed evenly on steep banks and dam slopes where a push spreader is hard to use. As a result, you can establish new cover quickly after you dig, dredge, or repair a pond.

Ready to work smarter? Order the Extreme Blower Spreader XD today and get more out of the blower you already own.