Description
Vertex PondLyfe 4 Aeration System: Affordable Aeration for Ponds Up to 1.5 Acres
The Vertex PondLyfe 4 aeration system is Vertex’s line for smaller ponds and water gardens. A ¼-hp compressor in a compact PondLyfe cabinet sends air to the pond bottom. There, fine bubbles rise and lift low-oxygen water to the surface. As a result, oxygen levels rise, muck breaks down faster, and murky water clears up over time.
The PondLyfe 4 pairs a two-disk station for the main basin with a single-disk station for a second area. In other words, it puts the most air where the pond needs it most. It comes with one two-disk XL2SW AirStation and one single-disk XL1 AirStation, designed for water about 4–8 ft. deep.
Is the PondLyfe 4 Right for Your Pond?
Best for: Ponds with one main basin plus a smaller cove or second area. All four PondLyfe systems cover up to about 1.5 acres. The difference is how many stations share the air. Not sure which one fits? Call Kevin at (319) 350-2918.
Vertex PondLyfe 4 Aeration System Features
- ¼-hp compressor: 115V, 2 CFM of air, and a low 1.6-amp running draw.
- AirStations: one two-disk XL2SW AirStation and one single-disk XL1 AirStation.
- Three cabinet colors: Sand, Stone, or Garden, so the cabinet blends into your landscape.
- Plug and go: set the cabinet on shore and plug it into a standard outlet.
- Safe: because only air goes into the pond, there’s no electricity in the water.
Tubing Sold Separately
Add Vertex BottomLine self-weighted tubing to connect the cabinet to each AirStation. First, measure from the cabinet to each station location, following the shoreline and bottom. Then add the runs together and round up.
Shipping
Because we don’t stock these systems, the PondLyfe 4 ships directly from Vertex Water Features.
Vertex PondLyfe 4 Aeration System Specifications
| Manufacturer | Vertex Water Features |
|---|---|
| Coverage | Up to about 1.5 surface acres |
| Compressor | ¼ hp, 115V, 2 CFM, 2.0/1.6 max/running amps |
| AirStations | One XL2SW (two disks) and one XL1 (one disk) |
| Best depth | About 4–8 ft. |
| Cabinet | PondLyfe cabinet in Sand, Stone, or Garden |
| Running cost | About $17 a month, 24/7, at about 12.5¢ per kWh |
| Warranty | Compressor 3 years (excludes filters and maintenance kits); AirStations 5 years; cabinet lifetime against rust |
| Tubing | Sold separately: BottomLine self-weighted tubing |
PondLyfe 4 FAQs
How large a pond will the Vertex PondLyfe 4 aeration system aerate?
Up to about 1.5 surface acres, depending on the pond’s shape, depth, and oxygen demand. For larger ponds, see the Vertex Air systems, or call Kevin at (319) 350-2918.
How much does it cost to run?
Running 24/7, the ¼-hp compressor costs about $17 a month at the national average rate of about 12.5¢ per kWh. Your cost depends on your local electric rate.
Does the tubing come with the system?
No. Instead, add BottomLine self-weighted tubing in the length you need.
Which cabinet color should I choose?
Pick the color that best matches your shoreline. Sand suits beaches and light rock, Stone suits gray rock, and Garden blends into plantings.
How does it ship?
Because we don’t stock these systems, it ships directly from the manufacturer, Vertex Water Features.
Can I run my pond aerator in winter?
Yes, and it often helps, but set it up for winter first. Bubbling up the deepest, warmest water can super-chill the pond. On systems with several diffusers, use the shutoff valve to turn off the deepest one and leave the others in place. With a single diffuser and no valve, move it to shallower water. Always mark any open or thin ice. See our winter aeration FAQ for details.









Reviews
There are no reviews yet.