Description
Vertex Air 1 Aeration System: Bottom Aeration for Ponds Up to 2 Acres
The Vertex Air 1 aeration system pumps air from a shoreline compressor to an AirStation on the pond bottom. There, millions of fine bubbles rise and lift low-oxygen bottom water to the surface, where it picks up oxygen. As a result, the system breaks up stratification, gives fish more room to live, and helps bottom muck break down.
In a typical pond, one Air 1 aerates about 1–2 acres. However, coverage depends on the pond’s shape, depth, and oxygen demand.
Vertex Air 1 Aeration System Features
- ⅓-hp Brookwood compressor: a 115V piston compressor with SafeStart, built to run 24/7 for about $40 a month in electricity.
- XL2 AirStation: two self-cleaning membrane disks move up to 5,100 GPM.
- Matched to your depth: choose a standard XL2 or a shallow-water XL2SW station for water about 4–8 ft. deep.
- Weighted base: designed to sit on top of soft bottom sediment instead of sinking in.
- QuietAir cabinet: powder-coated aluminum with a 140 CFM cooling fan, GFCI protection, a disconnect switch, and a mounting pad.
- Safe: because only air goes into the pond, there’s no electricity in the water.
Tubing Sold Separately
The Vertex Air 1 aeration system needs airline to connect the compressor to the AirStation. Add Vertex BottomLine self-weighted tubing in 50-, 100-, or 500-ft. lengths. First, measure from where the cabinet will sit to the deepest part of the pond, following the shoreline and bottom. Then round up to the next length. Also, BottomLine sinks on its own and carries a 15-year warranty.
Shipping
Because we don’t stock these systems, the Air 1 ships directly from Vertex Water Features.
Warranty
| Component | Warranty |
|---|---|
| Brookwood compressor | 3 years (excludes air filters and maintenance kits) |
| XL2 AirStation | 5 years, no questions asked |
| QuietAir cabinet | Limited lifetime against rust and corrosion |
| BottomLine tubing (sold separately) | 15 years |
Vertex Air 1 Aeration System Specifications
| Manufacturer | Vertex Water Features |
|---|---|
| Coverage | About 1–2 surface acres |
| Compressor | ⅓-hp (0.25 kW) Brookwood piston, 115V, 2.5 CFM, SafeStart, thermal overload protection |
| AirStation | One XL2 or XL2SW, two self-cleaning membrane disks |
| Pumping capacity | Up to 5,100 GPM |
| Cabinet | QuietAir powder-coated aluminum, 140 CFM fan, GFCI, disconnect switch |
| Tubing | Sold separately: BottomLine self-weighted tubing |
| Maintenance | Compressor service about every 2–3 years |
Vertex Air 1 FAQs
How many acres does the Vertex Air 1 aeration system cover?
About 1–2 surface acres in a typical pond. However, long, narrow, or very shallow ponds may need more than one AirStation. For help sizing your system, call Kevin at (319) 350-2918 to size your system.
Does the tubing come with the system?
No. Instead, add BottomLine self-weighted tubing in the length you need to reach from the cabinet to the deepest part of your pond.
Is it safe to swim near?
Yes. The compressor stays on shore, and only air goes into the water, so there’s no electricity in the pond.
Is it loud?
The compressor sits inside a vented QuietAir cabinet, so it runs quietly. In addition, you can place it anywhere within reach of power and your tubing run.
What maintenance does it need?
First, check and clean the air filter regularly. Also, plan on a compressor maintenance kit about every 2–3 years. Meanwhile, the AirStation’s membrane disks clean themselves.
What power does it need?
Just a standard 115V outlet near the pond. In addition, the cabinet has GFCI protection built in.
How much does it cost to run?
Running 24/7, the ⅓-hp compressor costs about $40 a month at the national average rate of about 12.5¢ per kWh. Your cost depends on your local electric rate.
How does it ship?
Because we don’t stock these systems, it ships directly from the manufacturer, Vertex Water Features.
Can I run my pond aerator in winter?
Yes, and it often helps, but set it up for winter first. Bubbling up the deepest, warmest water can super-chill the pond. On systems with several diffusers, use the shutoff valve to turn off the deepest one and leave the others in place. With a single diffuser and no valve, move it to shallower water. Always mark any open or thin ice. See our winter aeration FAQ for details.












